PNI P17UV Manual De Usuario página 18

Advanced functions
Frequency scanning
In frequency mode, long press the #SCAN key. The transceiver will start scanning frequencies
according to the set frequency step.
You can change the scanning direction using the keys ▲/▼
Press #SCAN key or PTT key again to stop scanning.
The scanning mode can be set in menu no. 20 (Scan Mode). Press MENU - [2] - [0]
In the frequency mode, the frequency range to be scanned can be precisely set. Please access
menu no. 19 (Scan Ran). Use the keyboard to enter the start and end value of the frequencies
to be scanned.
For example, enter 144146 to scan the 144,000-146,000MHz range or enter 430450 to scan
the 430,000-450,000MHz range.
Note: In channel mode, the frequency range setting cannot be set.
Channel scanning
In channel mode, long press the #SCAN key. The transceiver will start scanning the set channels.
You can change the scanning direction using the ▲/▼ keys
The scanning mode can be set in menu no. 20 (Scan Mode). Press MENU - [2] - [0]
User manual 18