PNI P17UV Manual De Usuario página 40

• Minus: Negative offset
• None: no Offset
Note: you should set different frequency deviations depending on the selected repeater. This
function is not active in channel mode.
27. Offset frequency (Offset)
Shortcut [MENU] [27]
You can set the deviation between TX and RX. The frequency offset of this transceiver is
00.000-69.990MHz.
28. Channel memory (Memory)
Shortcut [MENU] [28]
When the transceiver is in frequency mode, directly enter the frequency using the numeric
keypad.
Already stored channels appear as CH-xxx (XXX - channel number, e.g. CH-010), while the
other channels are displayed only with their number (e.g. 008)
Note: if you want to set CTCSS tones or DCS tones or Frequency Offset, you must do it before
memorizing the channel.
User manual 40