Positioning
Install this appliance at a location where the ambient temperature
corresponds to the climate class indicated on the rating plate of the
appliance:
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the
appliance is positioned below an overhanging wall unit, the minimum
distance between the top of the cabi- net and the wall unit must be at least
100 mm. ideally, however, the appliance should not be positioned below
overhanging wall units. Accurate leveling is ensured by one or more adjust-
able feet at the base of the cabinet.
Warning! It must be possible to disconnect the appliance from the mains
power supp-ly; the plug must therefore be easily accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the
rating plate correspond to your domestic power supply. The appliance
must be earthed. The power supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed,
Climate class
SN
N
ST
T
Ambient temperature
+10
o
C to +32
o
C
+16
o
C to +32
o
C
+16
o
C to +38
o
C
+16
o
C to +43
o
C
41