Publicidad
Idiomas disponibles
Idiomas disponibles
English
while reverting back to MODE the next feeding time is displayed.
Example:
After the batteries have been inserted, the time begins at
the double point blinks at one second intervals.
Setting the current time:
SET
> Hours blink and are set with + .
MODE
> Minutes blink and are set with + .
SET
> Current time is stored.
Programming feeding time 1:
MODE
> Feeding time 1 is displayed with
on the upper section of the LCD.
SET
> Hours blink and are set with + .
MODE
> Minutes blink and are set with + .
MODE
> Digit 1 blinks, the feeding mode must be set with + .
1 n
1 nn = feed is dispensed twice at 1 minute interval.
SET
> Feeding time 1 is stored.
MODE
> The next feeding time is displayed.
This can be programmed as above through SET, or
when the MODE button is pressed repeatedly, it goes
through the next feeding times back to the current time.
D
Manual operation
For feeding outside the programmed times, press the "EHEIM" manual
feeding button, which allows the rotating of the container to be trigger-ed
manually.
E
Filling
Take out the container unit lengthwise and remove the cover on the back.
Clean the drum, ensuring it is dry, and fill the amount of feed. Then place
the cover back on and insert the drum unit onto the axis.
The automatic feeder is suitable for dry feed such as flake food and
granulates. Do not use for live or freezed feed!
F
Feeding amount
By adjusting the slider, the container opening can be varied in order to
dose the amount of feed as required. For larger amounts, the program-
ming can be done at an interval of two times in a row.
G
Positioning
Place the automatic feeder on the aquarium cover so that the feed can fall fre-
ely to the surface of the water. The drive unit with its reverse air-intake
opening must not be located in the humid-air section of the open aquarium. Do
= feed is dispensed once.
- 13 -
00 : 00
00 : 00
and the digit 1
, and
Publicidad
