Publicidad
Idiomas disponibles
Idiomas disponibles
English
not cover up the air-intake opening. In some aquarium covers, a correspon-
ding feed opening has already been provided.
Optional: With open aquariums the automatic feeder device can simply be
hung onto the edge of the tank using the supplied holder and screwing down
firmly.
4. Maintenance
CAUTION! Material damage.
4 Do not use hard objects or aggressive cleaning agents for cleaning.
The following sections describe maintenance work necessary for optimum
and fault-free operation. Regular maintenance prolongs the service life and
assures functionality of the unit over a long period.
5. Cleaning
1. Remove the automatic feeder from the aquarium.
2. Remove the drum unit from the drive unit.
3. Remove the cover from the feed drum.
4. Clean the cover and feed drum under running water.
5. Clean the drive unit with a soft, dry cloth.
6. Install the automatic feeder in reverse orde
6. Decommissioning and disposal
Storage
1. Take the appliance from the aquarium
2. Remove the batteries
3. Clean the appliance
4. Store the appliance in a frost-proof place.
Disposal
When disposing of the appliance, pay attention to the relevant
statutory regulations. Information on the disposal of electrical
and electronic appliances in the European Union: Within the
European Union, disposal of electrically operated appliances is
governed by national regulations that are based on the EU Direc-
tive 2012/19/EU on waste electrical and electronic equipment
(WEEE). The appliance may no longer be disposed of with the
municipal or household waste. The appliance will be accepted
free of charge at municipal collection points or recycling centres.
The product packaging is made up of recyclable materials. Dispo-
se of them in an environmentally responsible manner and take
them for recycling.
Do not dispose of used or defective batteries in the household
waste. The batteries can be returned to your dealer or to local
collection points.
- 14 -
Publicidad
