Publicidad
Idiomas disponibles
Idiomas disponibles
Screen and functions (HM-1035 P)
START/
+ 30 SEC button
The START/+30 SECbutton is used to
start a cooking cycle and increase the
reheat time by 30 seconds.
•The START/+30 SEC button is used to
reheat for 30 seconds at full power
(100%). The oven will start immediately
and 30 seconds will be added to the
countdown each time the button is
pressed, up to a maximum reheat time
of 5 minutes.
Note: The START/+30 SEC button can
only be pressed in manual time input
mode.
STOP/RESET button
The STOP/RESET button stops the cooking cycle in progress and must be pressed
again to delete the remaining cooking time.
When the STOP/RESET button is used to end changes to the program, the changes are
cancelled.
This function allows each number button to be programmed for a specific cooking
cycle. To use this function, just program the length of time and power level required.
Press the button once and the microwave will start to cook the food. Number buttons
1-10 are preset, but you can change them.
This function allows up to 10 additional programmed entries. A two-digit number will
be assigned to each entry. When two-button programming is used, the button must be
pressed twice in a period of 2 seconds for the cooking cycle to start.
QTY 2X button
The QTY 2X button doubles the original cooking time. The QTY 2X button can be used
together with single or two-button programming. The maximum cooking time is 60
minutes, except when cooking at full power (100%). When full power (100%) is used,
the maximum cooking time is 20 minutes.
Stage cooking
Stage cooking is a cooking cycle with specific levels and times in which the power is
changed. The user can program up to three different power level changes and the
specific length of time for each power level. Each power level and cooking time
combination is what is called a stage. The stage cooking function is only available in
electronic control models. The maximum cooking time is 60 minutes, except when
cooking at full power (100%). When full power (100%) is used, the maximum cooking
time is 20 minutes.
PROGRAM button
This function allows a number button to be programmed for a power level and specific
time during stage cooking.
POWER LEVEL button
The POWER LEVEL button allows you to program a cooking cycle for a specific power
level (100%, 80%, 60%, 40%).
Single button programming
Two button
programming
5
ENGLISH
Publicidad
