RCM BIT 391CB Uso Y Mantenimiento página 37

2.1 UNPACKING
Once the packaging has been removed as
shown in the instructions on the packaging it-
self, check that the machine and all the com-
ponents supplied are intact.
If any evident damage is found, contact the
area agent and the carrier within 3 days of
receipt
- Remove the pack (1) containing the ac-
cessories supplied and the box (2) con-
taining the brush.
2.1.a - Standard machine equipment
(Fig. 2)
The accessories supplied are as follows:
1) Water filling hose.
2) Machine use and maintenance manual.
3) Battery charger instruction manual
4) Filter for clean water tank opening.
5) 30A fuse.
6) Brush.
3.1 ASSEMBLING THE
COMPONENTS
3.1.a - Positioning of the handle
(Fig. 3)
- Unlock the handle (1) pulling the lever
(2) and lift it placing it in the desired posi-
tion.
2
(Fig. 1)
EN-7
2
3 3
5
2
EN
1
Fig. 1
1
4 4
6
Fig. 2
1
Fig. 3