Descargar Imprimir esta página

RCM BIT 391CB Uso Y Mantenimiento página 40

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
EN
4.1 CHARGING THE
BATTERY
(for CB version only)
DANGER:
Charge the batteries in well-ventilated ar-
eas which comply with standards in force
in the country of use.
For safety-related information, follow what
is described in chapter 1 of this manual.
WARNING:
For information and warnings about the
battery and the battery charger, follow
what is described in the battery and bat-
tery charger manual enclosed with this
document.
-
Move the machine to the vicinity of a main
electrical socket.
-
Unwind the cable (2) and connect it to the
outlet.
WARNING:
Check that the mains voltage is compat-
ible with the operating voltage of the bat-
tery charger (110 - 240 V, 50/60 Hz).
-
Leave the batteries to charge until the
"Green" LED (4) comes on, then remove
the power cable (2) and wind it up in the
specific support.
N.B.:
10 hours are needed for complete battery
charging.
Avoid partial recharges.
(Fig. 6)
EN-10
1
2
4
Fig. 6

Publicidad

loading

Este manual también es adecuado para:

Bit 391c