U S E R M A N U A L
URBANISTA LISBON
Thank you for choosing an
Urbanista product.
FIRST TIME PAIRING AND
RECONNECTING
To
connect
Bluetooth device for the first time, open
the charging case whilst the earphones
remain inside the case. The earphones
will automatically enter pairing mode.
Open
Bluetooth
device and select "Urbanista Lisbon"
to connect. If pairing is not established
within 5 minutes, pairing mode is
canceled and the procedure must start
over. The earphones will automatically
reconnect to the same device you have
paired them with when next turned on.
CONNECT TO ANOTHER DEVICE
Disconnect the earphones from the
device to enter pairing mode again or to
connect to another device. The earphones
can store up to six paired devices.
4
the
earphones
settings
on
CHARG ING AND BATTERY
The
earphones
charging when put back into the charging
case. A "low battery" voice prompt will notify
you when there are 30 minutes of playtime
remaining, after which the earphones will
automatically turn off.
to
a
Use the included USB Type-C cable connected
to a power source to charge the case. The
"Battery Status Indicator"
charging and continuously lit when the case is
fully charged.
your
•
0-35 % - The LED pulses red
•
35-70 % - The LED pulses white
•
70-100
continuously
When not charging the case, simply open
the lid to see the status of the charging case
battery.
will
automatically
will pulse during
%
-
The
LED
( E N )
start
is
lit
white