Descargar Imprimir esta página

NEFF T D82 Serie Instrucciones De Uso página 26

Ocultar thumbs Ver también para T D82 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Accessing the basic settings
The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch and hold the
2.
4 seconds.
and
flash alternately in the displays and
preset.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
Dishwasher detergent
Abrasive products
Fixing malfunctions
Malfunctions are usually due to small details. Before calling the
Technical Assistance Service you should bear in mind the
following advice and warnings.
Indicator
none
The indicators flash
The indicator - flashes on
the hotplate indicators
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
26
symbol for
"
appears as a
Malfunction
The electric power supply has been cut off.
The appliance has not been correctly con-
nected following the connection diagram.
Electronic system malfunction.
The control panel is damp or an object is rest-
ing on it.
A fault has occurred in the electronic system. Briefly cover the control panel with your hand to con-
Touch the
symbol repeatedly until the required function is
"
3.
displayed.
Then select the required setting with the + and - symbols.
4.
Touch and hold the
"
symbol again for 4 seconds.
5.
The settings have been saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Corrosive products such as oven sprays or stain removers
Sponges that may scratch
High-pressure or steam cleaners
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
Do not use sharp or abrasive products
Do not use a glass scraper
Solution
Use other electrical appliances to check whether there
has been a power cut.
Check that the appliance has been connected cor-
rectly according to the connection diagram.
If none of the above checks resolve the malfunction,
contact the Technical Assistance Service.
Dry the control panel area or remove the object.
firm the malfunction.

Publicidad

loading