EMERYMARK EMP 200 Manual De Operación página 47

!
WARNING:
Unproper voltage supply will avoid the warranty.
Special Note: If you have a three phase Delta system, the highest voltage connection (wild
wire) must be connected to L2 (red wire).
Note: Three phase (3ph) units require four wire connections (three line voltages and one earth
ground), Single phase (1ph) units require three wire connections (two line voltages and one
earth ground).
1.3.3 Reference information
Write down the following information as soon as you receive the equipment. Enter the data of
the installation, this information will help you to order spare parts and technical service for your
equipment.
Model:
Serial number:
Electrical and voltage specifications:
Max Amps / switch:
Low capacity circuit:
Installation date:
Technician:
Address:
Phone number:
1.3.4 Refrigerant service
Our equipment uses refrigerant type 404A. The service related to the refrigerant must be ca-
rried out by a technician authorized by EMERYMARK or by authorized distributors.
If you need a service, request it by phone or by email to EMERMARK or your authorized distributor.
1.3.5 Replacement and part orders
To guarantee proper functioning and a long life of
your EMERYMARK equipment, please contact your
authorized distributor so we can provide services
such as maintenance, repair and change of spare
parts and validate your guarantee.
Installation
PROTECT YOUR EQUIPMENT
WITH ORIGINAL PARTS
47