Impecca RA-2150 Guia Del Usuario página 7

DOOR REVERSAL
Reverse doors before storing food or other items inside.
Before reversing the doors, ensure that you have the following pieces and tools.
The tools you will need are a flat-head screwdriver, a philips head (cross head) screw-
driver, and a spanner. Components included with the unit, inside a plastic bag, are
A. 1 x left hinge,
B. 1 x left hinge cover,
C. 2 x left middle stoppers,
D. 2 x left middle stopper metal blocks.
1. Close the upper door, take out the
screw from the top hinge covers using
a cross screwdriver. Take off the hinge
cover, then unscrew the top hinge and
take off the upper door.
2. Use a cross screwdriver to unscrew
the milddle hinge and remove the
lower door.
3. Gently lay down the fridge, and take
out the adjusting feet as shown, then
unscrew the lower hinge using a cross
screwdriver.
4. Unscrew and remove the bottom
hinge pin using a spanner. Turn the
bracket over then replace the hinge
pin in a revese direction in the same
hole.
5. Refit the bracket onto the bottom
hinge pin. Replace both adjustable
feet. Transfer the lower door to the
proper position.
6. Unscrew the right middle stopper with
the metal block from the bottom of
the upper door. Install the left milddle
stopper and metal block in the bot-
tom left side of the upper door. (The
same operation as the lower door.)
A B
1a
2
4a
5
6a
7
C
D
1b
3
4b
6b