Descargar Imprimir esta página

SEVERIN WK 3392 Instrucciones De Uso página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
∙ The appliance must be used only on a
heat-resistant, level surface.
∙ Do not operate the appliance below a
hanging cupboard or similar object; there
is a risk that escaping steam may be
trapped underneath.
∙ Do not allow the appliance or its power
cord to come into contact with open
fl ames or any hot surfaces such as hot-
plates.
∙ Do not let the power cord hang free, and
keep the cord well away from hot parts of
the housing.
∙ Always remove the plug from the wall
socket,
- in case of any malfunction,
- after use,
- during cleaning.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Thermal safety cut-out
The pre-set thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating plate
is calcifi ed. Once the safety cut-out has
switched off the kettle, it must be allowed to
cool down suffi ciently, or must be descaled
before it is switched on again.
Before using for the fi rst time
To clean the kettle, boil and discard the fi rst
fi lling of water.
10
Boiling water
∙ Remove the water container from its base.
∙ Press the lid-opener on the handle to
open the lid, and fi ll the container with
water to the desired level, observing the
Min (0.5 l) and Max (1.5 l) markings.
∙ Close the lid and place the container back
on its base.
∙ Insert the plug into a suitable wall socket
and press the On/Off switch; the indicator
light comes on.
∙ The boiling process begins. After
reaching the boiling point, the appliance is
automatically switched off by the integral
steam cut-off device; the indicator light
goes out.
∙ To interrupt the boiling process, set the
On/Off switch to its Off position.
∙ To pour hot water, remove the container
from its base.
∙ To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
∙ Remove the plug from the wall outlet after
use (the red indicator light goes out).
∙ Do not leave any residual water in the
container.
Power cord wind-up storage
The wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
∙ Depending on the water quality in your
area, lime deposits may build up on the
heating element. It is advisable to remove
any such deposits at regular intervals.
∙ Any warranty claim will be null and
void if the appliance malfunctions

Publicidad

loading