Publicidad
Idiomas disponibles
Idiomas disponibles
2 / INSTALLATION
1. Fix ADJSUTSCREW A on the UPPER AIR TUNNEL of the oven, and then install the
oven into the cabinet.
Adjust the height of ADJUST SCREW A to keep 1mm gap between the
ADJUST SCREW A and the top plane of cabinet.
Do not trap or kink the power cord.
Make sure that the oven is installed in the center of the cabinet.
2. Open the door; fix the oven to the cabinet with SCREW B at the INSTALLATION HOLE
of TRIM KIT. Then fix the TRIM-KIT PLASTIC COVER to the INSTALLATION HOLE.
EN 18
Publicidad
