Brandt BMG2508B Instrucciones De Usuario página 152

3/ USING THE APPLIANCE
Operation Instructions
1. Clock Setting
When the microwave oven is electrified, the screen will display "0:00", buzzer will ring
once.
1) Press " " twice , the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " " to finish clock setting. ":" will flash, and the time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
the previous status automatically.
2. Microwave Cooking
1) Press " " once, the screen will display "P100". Turn "
power you want, and "P100", "P10", "P30", "P50" or "P80" will display in turn.
2) Press " " to confirm, and turn "
3) Press " " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press " " once, the screen displays "P100".
2) Turn " " to choose 80% microwave power.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking.
Note: the step quantities for the adjustment time of the coding switch are as follow:
" to set cooking time from 0:05 to 95:00.
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
EN 20
" , the oven will go back to
" right to choose the