Publicidad
Idiomas disponibles
Idiomas disponibles
The declared vibration total value and the declared
noise emission value(s) may also be used in a
preliminary assessment of exposure.
A warning:
− that the vibration and noise emissions during actual
use of the power tool can differ from the declared
values depending on the ways in which the tool is
used especially what kind of work piece is processed ;
and
− of the need to identify safety measures to protect the
operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in
addition to the trigger time).
INTENDED USE
This product is suitable for screwing in and out of
screws under general environmental conditions,
and can also be used for drilling operations on
wood, plastic, metal, walls, etc.
GENERAL DESCRIPTIONS
1.Speed Selector
2.Torque Presetting
Ring
3.Drill Chuck
4.LED Light
5.Switch Trigge
● Installing the battery pack
When installing or removing the battery pack, set the
reversing switch lever to the center position to avoid
the risk of accidentally touching the switch.
The battery pack is only partially charged at delivery,
and in order to ensure maximum battery power, it
must be fully charged in the charger before each use
EN
10
6.Battery Pack
7.Battery Indicator
Light
8.Mode Switch
9.Auxiliary Handle
When inserting the battery pack, make sure that
the battery pack is properly inserted into the case,
be sure to insert it until you hear the "click" sound,
indicating that the battery pack is firmly attached
to the machine. Otherwise, the battery pack could
accidentally fall out of the casing, causing injury to
the operator or others. Avoid plugging the battery
pack too hard or knocking it in with the aid of other
objects.
Note: Only the specified type of battery pack can
be used. The use of battery packs of other brands
carries the risk of injury, personal injury and property
damage due to battery pack explosion.
1
2
2. Removing the Battery
The battery is packed under the machine handle,
press the battery pack button down in the direction
of the arrow, and then pull the battery pack in the
direction of the illustrated arrow.
Note: Do not pull out the battery by force.
1
2
●Battery Indicator
CAUTION:
When you press the battery pack power button,
the battery indicator on the battery pack will show
the power of the battery pack, and the power level
is indicated by the state of the 4 red LED lights
(hereinafter referred to as a red light).
1
Status of Red LED Lights
4 lights lit
3 lights lit
1.Battery Pack
Button
2.Battery Pack
1.Battery Pack
Button
2.Battery Pack
1.battery indicator
Light
Approx. Battery Power
Left
75%-100%
50%-75%
Publicidad
