Publicidad
Idiomas disponibles
Idiomas disponibles
4)Power Tool Use and Care
a)Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool
if the switch does not turn it
on and off. Any power tool that
cannot be controlled with the
switch is dangerous and must
be repaired.
c)Disconnect the plug from
the power source and/or
the battery pack from the
power tool before making
any adjustments, changing
accessories, or storing
power tools. Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d)Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of
untrained users.
e)Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power
tool's operation. If damaged,
have the power tool repaired
before use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g)Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease.Slippery
handles and grasping surfaces
do not allow for safe handling
and control of the tool in
unexpected situations.
5)Battery Tool Use and Care
a) Recharge only with the
charger specified by the
manufacturer. A charger that is
suitable for one type of battery
may create a risk of fire when
EN
5
Publicidad
