PURE Contour 200i Air Manual De Instrucciones página 20

Update
The Update tab is only visible when you connect to Contour with an Ethernet cable. We
recommend using automatic firmware updates for your Contour, which are delivered via the Wi-Fi
connection when Contour is in Standby or Sleep mode. If the Status LED on Contour is static
amber, a new version of firmware is being installed. A firmware update takes between six to eight
minutes.
Note: Do not power off Contour while a firmware update is taking place.
Note: The controls on Contour and the remote control will not function during an automatic
firmware update.
Note: If you experience any problems with automatic firmware updates, see the following page for
information on how to update the firmware manually. If you need to carry out a manual firmware
update, we recommend that you carry out the update by using a directly connected PC. (See
page 22 for more information).
Firmware
Date
Firmware
Version
Update
20
Displays the date that the currently loaded firmware was created on.
Displays the version of firmware that is currently loaded on Contour.
Click Update to start the manual firmware update. Refer to the next page for
more detailed information.