PURE Contour 200i Air Manual De Instrucciones página 21

Upgrading firmware manually
Manual firmware updates
We recommend that you use automatic updates to obtain the latest firmware updates (see page
20). However, there may be occasions where automatic firmware updates are not possible due
to internet connection problems or if an automatic firmware update failed for any reason, e.g., if
there was a power cut during an automatic firmware update. The latest firmware updates can be
downloaded from the Pure support website and can be uploaded on to Contour either by using
a directly connected PC (see page 22) or by using your router network connection. If you are
using your router network connection to update Contour firmware, access Contour Setup Manager
by entering the IP address that was allocated to Contour by your router and refer to the steps
outlined on page 23. If you do not know how to find the IP address that has been assigned to
Contour from your router please use the point to point connection method detailed on the next
page.
Note: Consult your router documentation for more information on how to find out the IP address
that has been allocated by your router.
EN
21