PURE Contour 200i Air Manual De Instrucciones página 24

6. The following window will appear,
summarising the firmware update
task. Click Update to begin the
firmware update.
7. The following window will appear
to indicate the firmware update
progress.
Note: The firmware update consists
of two stages. Each stage needs
to be completed from 1 to 100%.
Do not pull the power and wait for
both stages to be completed.
8. The following window will appear to
indicate that the firmware update
has completed. Remove the Ethernet
cable and press the Power button to
boot Contour up with the new version
of firmware.
Note: If you carried out the firmware update using the directly connected PC method, disconnect
your computer's Ethernet cable from the port on the back of Contour and reconnect
Contour to your network using either the wired or wireless connection method after the
firmware update has completed.
Note: If you disabled any wireless connections on your PC during the firmware update, you will
need to re-enable them so that you can connect to your wireless network.
24