PURE Contour 200i Air Manual De Instrucciones página 23

Updating firmware using Contour Setup Manager
1. Click the Update tab and then
click the Update button.
2. The following dialogue box will
appear, asking if you want to
update Contour firmware via the
Ethernet. Click OK to confirm.
3. Wait for the LED to change from
white red slow flash to white
blue slow flash (this can take
up to 4 minutes) and move to
step 4.
4. The following window will appear.
Click Browse and navigate to the
location on your computer that
you downloaded the firmware to.
5. Click Upload.
EN
23