Publicidad
Using a computer
Connecting the camera to a computer
Connecting to a computer
1
Insert a sufficiently charged battery pack into the camera.
2
Turn on the camera and the computer.
3
Check that [USB Connection] under
[Mass Storage].
4
Connect the camera to the
computer using the USB cable.
• When you connect the
camera to the computer for
the first time, the procedure
for recognizing the camera
may start automatically on
the computer. Wait until the
procedure is finished.
• If you connect the camera to
your computer using the USB
cable when [USB Power Supply]
is set to [On], power is supplied
from your computer. (Default
setting: [On])
• Use the USB Type-C cable
(supplied) or a USB-standard
cable.
• Use a USB 3.2-compatible
computer and the USB Type-C
cable (supplied) for higher-
speed communications.
(Setup) is set to
To a USB
terminal
To the USB Type-C
terminal
USB cable
GB
GB
55
Publicidad
