Mechanical Control Panel; Voltage Presence Light; Exclusion Of The Touch Display; Line Push Button On/Off - Colged TopTech 31-22.1 Manual De Instrucciones


The opening of the rinse solenoid valves with a flashing icon
Rinse pump operation with a flashing icon
Reference figure 1
The machine has an additional panel, positioned at the exit of the machine's baskets, on which there are some
basic controls and lights.
Reference figure 1
The light (7) indicates that the machine is electrically powered and it will remain on for the entire period in
which the wall main switch is set to ON.
Reference figure 1 and 5B
By turning the selector (8) clockwise, the touch keypad is excluded.
The display (3) will continue to show the parameters of the machine but it will no longer be possible to interact
with it.
This condition is signaled by the continuous lighting of the warning light (5) and by the presence of the icon on
.
the display .
To re-enable the use of the display, simply turn the selector (8) anticlockwise.
Reference figure 1
In the condition of touch display locked (see previous paragraph) it will be possible to switch off and switch on
the machine at any time by pressing the button (6).
When the machine is switched on again, it will start from the point and with the previously stored washing
program.
MDITT31-(r06)
DISHWASHER INSTRUCTIONS MANUAL
.
.

Mechanical control panel

7.13.1 Voltage presence light

7.13.2 Exclusion of the touch display

7.13.3 Line push Button ON/OFF

UK
Page 27 of 33