Hilti TE 60T Manual De Instrucciones página 22

Designation
Mixing paddles for non-flammable
materials, with smooth or hex.
shank
Dust removal system
AVR ‑ Active Vibration Reduction
ATC ‑ Active Torque Control
4 Technical data
Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the type identification plate for details of the
power tool's voltage and power rating.
Power tool
Rated power
Rated voltage / rated current
Mains frequency
Weight in accordance with EPTA procedure 01/2003
(TE 60 / TE 60T)
Weight in accordance with EPTA procedure 01/2003
(TE 60-ATC / TE 60T-ATC)
Dimensions (L x W x H) TE 60
Dimensions (L x W x H) TE 60‑ATC
Dimensions (L x W x H), TE 60T
Dimensions (L x W x H), TE 60T‑ATC
Hammer drilling speed
Drilling speed without hammering
Single impact energy in accordance with EPTA proced-
ure 05/2009 (50% power setting)
Single impact energy in accordance with EPTA proced-
ure 05/2009 (full power setting)
Other information about the power tool
Chuck (TE 60 / TE 60‑ATC)
Chuck (TE 60T / TE 60T‑ATC)
Protection class as per EN
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
Short designation
TE DRS‑S
TE 60 / TE 60‑ATC / TE 60T / TE 60T‑ATC
1,200 W
Rated voltage 100 V: 15.0 A
Rated voltage 110 V: 13.0 A
Rated voltage 120 V: 12.5 A
Rated voltage 127 V: 12.5 A
Rated voltage 110...127 V: 13...12.5 A
Rated voltage 220 V: 6.8 A
Rated voltage 230 V: 7.0 A
Rated voltage 240 V: 7.2 A
Rated voltage 220...240 V: 7.0 A
50...60 Hz
6.3 kg
7.4 kg
483 mm x 98 mm x 245 mm
483 mm x 98 mm x 284 mm
477 mm x 98 mm x 245 mm
477 mm x 98 mm x 284 mm
485/min
695/min
3.5 J
7.0 J
TE‑Y
TE‑T
Protection class II (double insulated)
Item number, description
∅ 80...120 mm
340602
en
19