Create BBQ SURFACE 2 IN 1 Manual Del Usuario página 9

9. Slide the barbecue shell down onto the
support tube of the barbecue cart. Se-
cure the casing to the carriage with the
thumb screw.
11. Attach the casing lid by fitting the pins
into the holes in the casing hinges. Make
sure it is well fixed and can be opened at
a 45º angle.
13. Place the removable side tray by fitting
the tubes of the trolley with those that
carry the tray at the bottom.
Note. Remember that to fold the barbecue once assembled you must remove the removable
side tray.
10. Then fit the grill plate to the case by in-
serting the power supply into the hole in
the case.
12. Insert the grease tray into the support
on the back of the barbecue casing and
then place the temperature regulator
with the power supply in its correspond-
ing slot without connecting to the elec-
trical outlet.
14. Once the product is completely assem-
bled, you can connect it to the electrical
outlet and start using the barbecue.
9
E NGLI SH