mysoda GLASSY Manual De Instrucciones página 4

PARTS AND FEATURES
SPARKLING WATER MAKER
INSTALLING THE CO2 CYLINDER
1. Open the device door by pushing
"Pressure Release"-button (•) at the
back of the machine top. Let the door
open on its own, do not force it.
4. Unscrew the black thread protective
cap on the top part of the device body.
7. Carefully insert back cover back to the
device.
ENGLISH
4
Pressure release button
/ door opening button (•)
Carbonating button (• • •)
Device door
Glass bottle /
Reusable plastic bottle
2. Remove the water bottle by pulling the
bottle and carbonation nozzle towards
yourself, and then unscrew it (one quarter
clockwise).
5. Remove the seal and cap from the
CO2 cylinder.
COMPATIBLE CO2 CYLINDERS
Mysoda Glassy, as well as all the other Mysoda machines, use the most common
carbon dioxide cylinder with screw-in system, so that you can always easily find
an exchange for your empty cylinder at your nearest store.
After the CO2 cylinder is empty, replace the CO2 cylinder in the
same way as the first time you installed the cylinder.
!
BEFORE THE FIRST USE: Hand-wash the water bottle with
lukewarm water and hand dishwashing detergent. Rinse well
and wipe outside with a soft cloth to dry. WARNING: Never
wash plastic water bottles or any bottle caps in a dishwasher or
in hot water. Harsh chemicals will damage the water bottle.
CO2 CYLINDER 1L GLASS BOTTLE
Usage tip: A used CO2 cylinder can be exchanged by a CO2
cylinder dealer near you. Return the empty cylinder so that you
only pay for the gas refill.
Usage tip: Keep a spare CO2 cylinder in your home so that you
can replace it as soon as you run out of gas. Extra cylinders are
available from CO2 cylinder dealers near you.
Bottle cap
Max fill level
1L PLASTIC BOTTLE
3. Remove back cover from the device.
6. Gently tilt the cylinder holder towards you
and install the CO2 cylinder by screwing it
clockwise. Attach the cylinder firmly
enough, but do not tighten too much.