Descargar Imprimir esta página

mysoda GLASSY Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
HOW TO MAKE SPARKLING WATER
CARE AND CLEANING OF YOUR DEVICE
1. Fill the Mysoda water bottle of
your choice with cold water up to
the filling line.
3. To insert the water bottle,
make sure that the device is
in a fully upright position and
the bottle quick-lock is angled
forward. Then insert the bottle
in quick-lock and turn one
quarter anti-clockwise to lock it.
Push gently the bottle towards the
device to a vertical position.
the water by pushing the
carbonating button (• • •) 2–3
times. Stop when you hear a
hissing sound.
6. Open the device door by
and turn it one quarter clockwise
to release the bottle.
8. Enjoy your carbonated water or
SPARKLING WATER MAKER:
To clean your sparkling water
maker, wipe with a damp cloth.
Do not immerse the device in
water. Do not use any solvents or
abrasive cleaners, since this could
damage the surface.
PLASTIC WATER BOTTLE:
Rinse the water bottle with clean water
after each use. Wash the bottle by
hand with hand warm water and hand
dishwashing detergent. Rinse well. Wipe
the outside with a soft cloth to dry.
2. Open the device door by pushing
"Pressure Release"-button (•) at
the back of the machine top. Let
the door open on its own, do not
force it.
4. Close the door by sliding it to the
right, now it is in closed position.
Always remember to close the door
as the device won't carbonate if the
door is open. As a safety feature,
the device will just automatically
release the pressure if the door is
open while you try to carbonate.
5. Now you can start to carbonate
pushing "Pressure Release"-
button (• ) at the back of the
machine top. Let the door open on
its own, do not force it.
7. Pull the bottle towards yourself
add desired flavor.
CO2 CYLINDER:
A used CO2 cylinder can be refilled by your Mysoda
dealer. Return the empty cylinder so that you only
pay for the gas refill.
GLASS BOTTLE:
Rinse the water bottle with clean water after each
use. Wash the bottle by hand with warm water
and hand dishwashing detergent. Rinse well.
Wipe the outside with a soft cloth to dry. Mysoda
glass bottles can also be washed in a dishwasher.
NOTE! That cap should not be washed in a
dishwasher.
ENGLISH
5

Publicidad

loading