Medion MD 22211 Manual Del Usuario página 19

Set-up
• If you want to install the product upside-down onto the
• Depending on the orientation of the product and whether
Positioning options
The product can be installed in four different confi gurations.
Orientation
Front Table
Front Ceiling
Rear Table
Rear Ceiling
20
ceiling, ensure that the ceiling provides the appropriate
weight bearing capacity, use an appropriate projector
ceiling mount kit and follow the assembly instructions
carefully.
it is in front or behind the screen, the projection has to be
adjusted. Please use the appropriate setting in the main
menu "OPTION" and sub-menu "FLIP" (see chapters
"Positioning options" and "Using the menus").
Sketch Explanation
Select this orientation with the product
placed near the fl oor in front of the
screen. This is the most common way to
position the product for quick setup and
portability.
Select this orientation with the product
suspended upside-down from the
ceiling in front of the screen.
Note: A projector mount is required to
install the product from a ceiling.
Select this orientation with the product
placed near the fl oor behind the screen.
Note: A special rear projection screen is
required.
Select this orientation with the product
suspended upside-down from the
ceiling behind the screen.
Note: A projector mount is required
to install the product from a ceiling.
A special rear projection screen is
required.