Publicidad
Idiomas disponibles
Idiomas disponibles
Use
Turning the product on and off
1. Take the lens cover off
Turn the product on by pressing the On/Off button
The indicator light
The product turns on and displays the screen.
2. Make sure, that you have a source connected (see chapter "Input source").
If applicable, turn on the source such as a computer, notebook, etc..
If the screen displays "No Signal", make sure the source connection cables
are securely connected.
If you connect multiple sources at the same time, use the source button
to switch between input sources (see chapter "Input source").
7
3. To turn the product off, press the On/Off button again.
When English is set as operation language, the message "To Power Off" /
"Press other key to cancel" is displayed on the product's screen.
Press the On/Off button again to confi rm, otherwise the message will
disappear after approx. 10 seconds.
Once you confi rm by pressing the On/Off button, the indicator light
illuminates red and the product turns off.
Adjusting the projected image
Adjusting the projected image height
The product is equipped with an height-adjustable foot
the projector
A
a surface.
1. To move the projected image up, screw the height-adjustable foot
counter-clockwise.
2. To lower the projected image, screw the height-adjustable foot clockwise.
.
F
illuminates green.
11
for adjusting the image height when the product is placed on
.
12
at the bottom of
3
3
Use
21
Publicidad
