Medion MD 22211 Manual Del Usuario página 26

OSD Language
Flip
Aspect Ratio
Option
AV mode
HDMI mode
VGA mode
USB/TF mode
Restore Factory Default
Software Update (USB)
Faults and troubleshooting
Problem
The projected image is
blurry.
The remote control is
unresponsive.
The projected image is
upside down and/or
mirror inverted.
German / English / Spanish / French /
Polish / Italian / Portuguese / Swedish
/ Finish / Greek / Russian / Danish
/ Norwegian/ Hungarian / Chinese
Simplifi ed
Front Table / Front Ceiling / Rear Table /
Rear Ceiling
4:3, 16:9, Full, Panorama
4:3, 16:9, Full, Panorama, Just Scan
4:3, 16:9, Full
4:3, 16:9, Full, Panorama, Just Scan
Are you sure? Yes / No
Can't Detect USB (if there is no USB drive
connect)
Possible reason
The focus and/or
keystone are off.
The batteries have
fully discharged.
The setting is wrong.
Faults and troubleshooting
Solution
Adjust the focus ring
and/or the keystone ring
(see chapter "Adjusting the
projected image").
Replace the batteries of the
remote control (see chapter
"Maintenance and Care").
Press the image fl ip
button repeatedly to fl ip
27
the projected image.
4
5
27