Publicidad
Idiomas disponibles
Idiomas disponibles
Input source
Multimedia sources can be connected via the HDMI slots
the AV IN port
21
Before connecting a multimedia source to the product, make sure to use the
source connection cable appropriate for the source and turn all equipment off
before connecting the cables.
Ensure a tight fi t of the cables before switching the product and multimedia
sources on.
One HDMI cable
Additional cables may be purchased from electronics stores.
To select the multimedia source proceed as follows:
1. If the Start Screen isn't shown, press the source button
control
B
Start Screen.
2. Use the arrow buttons
3. Confi rm your selection by pressing the Confi rmation button
remote control or the confi rmation button
If you have connected an SD card or a USB stick to the projector, select the type of
media that you want to play back on the start screen.
You can choose between MOVIE / PHOTO / MUSIC and TEXT.
Call up the On Screen Display menu (see the "Using the menus" chapter) via the
MENU menu item.
Connecting audio
The product has one built in mono speaker
into a common mono audio output by the speaker.
The internal speaker is muted when the audio OUT port
device.
Using the menus
The product has multilingual On Screen Display (OSD) menus that allow you to
make image adjustments and changes to a variety of settings.
1. To open the OSD menu, press the menu button
control
B
Alternatively, you can also select the Menu menu item on the start screen.
or the VGA port
E
or the source button
/
30
or on the control panel
.
17
is part of the scope of delivery.
on the control panel
7
to select the appropriate source.
8
14
. Any stereo audio input is mixed
19
.
6
, the USB port
22
on the remote
34
to enter the
6
35
on the control panel.
is connected to a
26
/
on the remote
32
9
Use
,
23
on the
25
Publicidad
