Qilive Q.5714 Manual De Instrucciones página 12

7. TROUBLESHOOTING
EN
Problem
The appliance suddenly
stopped working
use.
The appliance does not
run after turning the Speed
knob.
Excessive noise when the
machine is running
Possible cause
■ The Overheat
during Protection has been
activated and has
automatically turned off
the appliance.
■ The machine was used
for too long without
breaks.
■ The ambient
temperature is too
high.
■ Loose contact between
the plug and power
socket.
■ Power outage.
■ The fuse switch has
tripped due to circuit
overload.
■ The appliance makes
more noise at high
speeds than at low
speeds.
■ Too much ingredients
in the mixing bowl.
■ Incorrect assembly.
■ Running time is too
long.
■ Set the Speed knob
■ Follow the
■ Use the appliance in a
■ Make sure the plug is
■ Check the power
■ Unplug high wattage
■ Choose the correct
■ Do not exceed 1.5 kg
■ Check and reassemble
■ Stop the appliance and
12
Solution
to "0" and unplug the
appliance. Let the
appliance cool down
to room temperature
(approx. 15-30 min.)
to reset the Overheat
Protection.
recommended running,
rest and maximum
operating times to
avoid overheating the
appliance.
cool place.
fully inserted into the
power socket.
source by plugging
another appliance into
the socket.
appliances plugged
into the same circuit
and move the tripped
fuse switch in your
fuse box back to "On".
accessory and speed
for the ingredients.
in the mixing bowl.
the accessory or
attachment.
let it cool down for a
while.