Siemens SIMATIC S7-300 Información Del Producto página 11

"Standards and approvals" section
Note
The currently valid approvals can be found on the nameplate of the module.
Note
This section supplements the section "Standards and approvals" of the "ET 200M
(https://support.industry.siemens.com/cs/ww/en/view/1142798)" operating instructions with information on fail-safe signal
modules.
CE approval
Our products meet the requirements and protection objectives of the following EC directives and comply with the
harmonized European standards (EN) published for programmable logic controllers in the Official Journals of the European
Community:
• 2006/42/EC "Directive on machinery" (Machinery Directive)
• 2014/30/EU: "Electromagnetic compatibility" (EMC Directive)
• 2014/34/EU "Equipment and protective systems intended for use in potentially explosive atmospheres" (ATEX directive)
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and electronic equipment" (RoHS
Directive)
The EU Declarations of Conformity are available to the relevant authorities at the following address:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
The EC Declaration of Conformity is also available for download from the Siemens Industry Online Support website under the
keyword "Declaration of Conformity".
Supplement: UKCA mark
The ET 200M distributed I/O system complies with the designated British standards (BS) for programmable logic controllers
published in the official consolidated list of the British Government. The ET 200M distributed I/O system meets the
requirements and protection targets of the following regulations and related amendments:
• Rules for the supply of machines 2008 (Safety)
• Electromagnetic Compatibility Regulations 2016 (EMC)
• Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres Regulations 2016 (Explosion
Protection)
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(RoHS).
The UK Declarations of Conformity are available to the relevant authorities at the following address:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
The UK Declaration of Conformity are also available for download from the Siemens Industry Online Support website, under
the keyword "Declaration of Conformity".
Product information on fail-safe signal modules
A5E50592408-AA, 11/2022
11