Kohler K-1579 Instrucciones De Montaje página 8

Secure the Unit (cont.)
Option Using Construction Adhesive
Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks.
With help, carefully lift the whirlpool into position.
Insert the drain tailpiece into the trap. Make sure the whirlpool is level and resting on all support
blocks.
Secure the whirlpool to the studding using the nailing-in flange and screws. Holes should be
pre-drilled from the acrylic side.
Fasten a plywood board under the pump to the subfloor using wood shims as necessary. Use
anchors if the subfloor is concrete. The board must be securely fastened to the floor.
1015054-2-B 8 Kohler Co.