HOMCOM 800-166V70 Manual De Instrucciones página 11

4.7.2. "Synchronous end key" means that two pots with different time selected will be end
at the same time. This means that the long time menu will start working first, the
short time menu will be paused first--the screen will show "HOLd", started when the
two pots have the same amount of time remaining, and will end at the same time.
4.7.3. When working in Simultaneous end mode, adjust the time of the pot which
show"HOLd" greater than the other side, Simultaneous end mode will stop, and the
indicator will turn off.
4.7.4. If you take out a pot during cooking, the time will be suspended on both pots – the
screen will display 'HOLd'. Insert the pot to continue cooking.
4.7.5. During synchronous operation, if one pot is suspended and the other continues to
work, exit the function.
Remark Items
1. Boot mode: When in this mode, only the Power Key Icon is illuminated.
2. Standby mode: The Power key,
3. Changing the settings when the unit is not working: The corresponding function key is
always on, whilst the selected recipe indicator will flash. The rest of the menu
indicators will stay lit, whilst the screen displays temperature/time of the selected
recipe. When adjusting the menu, the selected recipe will flash. When changing the
temperature, press the temperature key – the screen will display the current
temperature. Press the time key to adjust the time – the display will show the current
time. When one pot has been selected, the side that has not been selected will not
flash. The corresponding display alternately shows temperature and time without
flashing. During this process, heaters and motors will not work.
4. Changing the mode during cooking: The recipe does not flash. The screen displays the
temperature and time, which can be adjusted. The recipe cannot be changed.
5. Pausing a single pot: The corresponding function key stays on and the menu indicator
blinks when selected. The other menu indicators stay on and the corresponding display
screen blinks, indicating temperature/time.
and time can be adjusted.
6. Pausing both pots: the corresponding function key stays on, the selected menu
indicator blinks and the other menu indicator stays on. The display screen blinks,
showing the temperature/time. and will blink.
7. Working mode: The corresponding function key and the selected menu indicator stays
on – the other menu indicators are off and the corresponding screen displays the menu
time.
8. When the 2 pots are working at the same time, the key indicator and the corresponding
menu indicator of pot
9. Memory function: When cooking is finished, the machine will not power off. During the
next use, select the same pot as last time – the screen will display the menu last used.
The memory will be wiped when the machine has been off for one hour. When turned
back on, its initial state will resume.
10. Power off memory: If the machine is in use and the power cuts off accidently, if it is
turned on within 30 minutes, the machine will return to the working state before
turning off.
11. Display failure mode:
11.1. E1 is displayed: The NTC is Opened.
11.2. E2 is displayed: The NTC is Short Circuit.
and are all illuminated;
and will blink alternately for 3 seconds each.
11
or blinks – the menu, temperature