Gedore Dremotest E 8612-012 Manual De Instrucciones página 18

EN
The torque tester has been
designed to test clockwise
releasing torque wrenches.
The direction of rotation is clearly
marked on the housing.
Put the appropriate wrench
socket on the torque wrench
adaptor. Make sure that the
catching elements latch when
putting the wrench socket on the
torque wrench adaptor. Check for
a secure connection by
vigorously pulling on the wrench
socket.
Check whether the display is
showing " 0 0 0 0 ." If a
discrepancy is indicated in the
display, please proceed as
described in Section 3.4 (Taring
the Torque Tester).
Put the torque wrench including
the wrench socket on the torque
tester adaptor at a 90° angle.
Slip the hexagon socket onto the
hexagon adaptor as far as
possible.
Turn the torque wrench by the
handle slowly and steadily in the
direction of the arrow (follow the
direction of rotation arrow) until a
click sound can be heard and a
slight jerk felt.
18