Overload Hazard; Inaccurate Torque Settings; Explosion And Fire Hazard - Gedore Dremotest E 8612-012 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
The torque tester can be overloaded during use and break
causing SERIOUS INJURY or DEATH.
ALWAYS use only original accessory parts. Accessory parts
not approved by Gedore may not bear the loads or cause the
torque tester to overload.
ALWAYS inspect the torque tester for damage BEFORE use.
NEVER use a damaged torque tester.
NEVER use the torque tester if it has been dropped, if it has
been used to strike other objects, or if anything has fallen on
it.

INACCURATE TORQUE SETTINGS

An out-of-calibration torque tester can result in the failure of
the screw connections, the torque wrench, or the accessories.
This could cause SERIOUS INJURY or DEATH.
An out-of-calibration torque tester may cause the torque
wrench settings to be over- or under- torque, resulting in
SERIOUS INJURY or DEATH.
ALWAYS use tested and calibrated torque testers ONLY
(see Section 4.1 Testing and Calibrating).

EXPLOSION AND FIRE HAZARD

Sparks can occur when using the torque tester, which can
cause an explosion or a fire and could cause SERIOUS
INJURY or DEATH.
NEVER use the torque wrench in areas where sparks can
cause explosions or fires.
EN
WARNING

OVERLOAD HAZARD

WARNING
WARNING
6

Publicidad

Tabla de contenido
loading

Tabla de contenido