Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 ENERGY SAVING TIPS
The appliance should be located in
•
the coolest area of the room, away
from heat producing appliances or
heating ducts, and out of the direct
sunlight.
Let hot foods cool down to room
•
temperature before placing it in the
appliance. Overloading the appliance
forces the compressor to run longer.
Foods that freezes too slowly may
lose quality, or spoil.
Be sure to wrap foods properly, and
•
wipe containers dry before placing
them in the appliance. This cuts
down on frost build-up inside the
appliance.
Appliance storage bins should not be
•
lined with tin foil, wax paper, or paper
toweling. Liners interfere with cold air
circulation, making the appliance less
efficient.
Organize and label food to reduce
•
door openings and extended
searches. Remove as many items as
needed at one time, and close the
door as soon as possible
2.3 CHANGING THE LIGHT
Any replacement or maintenance of
•
the LED lamps is intended to be
made by the manufacturer, its service
agent or similar qualified person.
•
Light source in this product is
replaceable only by quialified engineers.
1. Please take out the plug before
removal.
2. Remove the lampshade with a
screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
2.4 START TO USE
Before initial start, keep the
•
refrigerator still for two hours before
connecting it to power supply.
Before placing any fresh or frozen
•
foods, the refrigerator should have run
for 2 - 3 hours, or for above 4 hours in
summer when the ambient
temperature is high. NOTE
NOTE
This product is not recommended for use
with sockets or main switch with the A/GFCI
function, otherwise it may cause false
tripping.
1. it's not pose a safety risk when tripped.
2. If tripping persists, it is recommended to
replace the sockets or main switch without
A/GFCI function.
12
V.1
Publicidad
