Kohler K-8253 Instrucciones De Montaje página 6

Valve
Stem
Spline Adapter
Handle Adapter
4. Install Swirl Handles
Discard the thread protectors and install a gasket on the bottom
of the escutcheon.
Turn the escutcheon clockwise onto the valve until it contacts the
finished wall.
Place the spline adapter onto valve stem.
Place the bonnet over the valve.
Place the handle adapter onto the spline adapter. Align the side
so it is parallel with the faucet body. This can be done by careful
adjustment of the spline adapter and handle adapter.
Secure the handle adapter with the screw.
Position the handle onto the handle adapter and thread the
bonnet onto the handle threads until tight.
1031377-2-B
Valve
Gasket
Escutcheon
Bonnet
Screw
Swirl Handle
6 Kohler Co.