Publicidad
Idiomas disponibles
Idiomas disponibles
•
"OFF" position: Turn the unit off.
4.3. ADJUSTING VOLUME
Turn the Volume control knob to adjust the volume.
4.4. SWITCHING MODE
When the Radio/Audio/OFF switch is in "Audio" position, you can switch between
Bluetooth and USB/TF/AUX IN operation by pressing the MODE button for about
3 seconds.
4.5. RADIO OPERATION
1.
Ensure the radio is connected to a power source as stated above.
2.
Slide the Radio/Audio/OFF switch to "Radio" position.
3.
Rotate the FM/AM selector left or right to select the AM or FM waveband.
4.
Extend the radio antenna to its full length to get the best reception.
5.
Tune to desired station by turning the Frequency dial in the front.
6.
To turn off the radio, move the slide switch to "OFF" position.
4.6. USB/TF OPERATION
Play MP3 files via TF/microSD card or USB flash drive.
1.
Ensure the radio is connected to a power source as stated above.
2.
Insert the USB stick or microSD card (FAT32 format) containing the music files in
MP3 format.
3.
Slide the Radio/Audio/OFF switch to "Audio" position. The device will emit a tone
and it will automatically start playing music saved in the USB or microSD card.
■ The blue MP3 Player LED will flash slowly during music playback.
4.
Rotate the Volume control knob to adjust the volume to desired level. During
playback:
■ Press
to pause or resume playback.
■ Press
or
■ Pres
to switch between Repeat All or Repeat One mode.
When blue light flashes slowly, only one track is repeated.
When blue light flashes fast, all the tracks will be repeated.
■ Press and hold
Bluetooth operation.
5.
To turn off the radio, move the slide switch to "OFF" position.
4.7. BLUETOOTH OPERATION
This radio plays music files from a Bluetooth source such as a mobile phone. This can
be music streaming sources such as Spotify, Apple Music, Youtube or music stored
directly on your phone.
* All trademarks are recognized.
1.
Ensure the radio is connected to a power source as stated above.
2.
Slide the Radio/Audio/OFF switch to "Audio" position.
3.
Press and hold MODE button for about 3 seconds to switch to Bluetooth
operation. The device will emit a tone. The blue MP3 Player LED will flash fast.
4.
On your mobile phone, go to Bluetooth settings and search for the Bluetooth
device. Select "Q.1673" to connect. There is no password.
5.
Once paired, the radio will emit a tone, the blue MP3 player LED will remain static,
and you are ready to play your music on your phone.
6.
During playback, the buttons on top of the radio are used to change:
■ Press
to pause or resume playback.
■ Press
or
■ Press and hold
Bluetooth operation.
to skip to the next or previous track.
for about 3 seconds to switch between USB/TF/AUX IN and
to skip to the next or previous track.
for about 3 seconds to switch between USB/TF/AUX IN and
7
EN
Publicidad
