LUCCI Air ABYSS IP66 Instrucciones De Instalación página 3

ABYSS IP66 Installation Instructions
•
Unpack your ceiling fan and carefully. Remove all parts and hardware.
•
Lay out all the components on a smooth surface and make sure there are no components missing before
assembling. If parts are missing, return the complete product to the place of purchase for inspection or
replacement.
•
Check whether the ceiling fan has been damaged during transport. Do not operate/install any product
which appears damaged in any way. Return the complete product to the place of purchase for inspection,
repair or replacement.
•
Examine and identify the parts. Please refer to Fig 1.
1 Mounting bracket x1
2 Canopy Cover x1
3 Blades x3
4 Pre-assembled fan motor, down rod
and canopy x 1
5
Celling Canopy Screws x 3 /Wood screw x 3 / Machine screw x 2 / Flat washer x 3 / Spring washer x
3 /
blade long screws
2 | P a g e
PARTS LIST
Fig. 1
x4 /blade short screws x7
6 Wire nut x6
7 balancing kit x1 set
8 Receiver x 1 set
9 Remote x 1set