Panasonic ES-LV6Q Instrucciones De Funcionamiento página 17

Shaving beard
1
Press and shave�
• The "shaving sensor", which automatically
adjusts the power depending on the beard
thickness, will operate.
It will shave with high power on areas
where the beard is heavy, and reduce the
power on areas where the beard is thin, to
reduce burden on the skin.
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
• To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
2
Press when finished.
14
ES-LV6Q_EU.indb 14
All manuals and user guides at all-guides.com
The used time and
remaining battery capacity
are shown and then turn off
after 7 seconds.
• The shown time returns to
• The shaving sensor lamp
"10%" appears and "
The appliance beeps twice after switched off.
• You can shave 1 to 2 times after "10%"
Notes
• The appliance may not operate in an ambient temperature
• The shaving sensor may not respond depending on the type
• Depending on the beard thickness or the amount of beard
• To prevent erroneous operation, place your fingers on the
While using
[0'00"] after 10 minutes.
( ) blinks.
When the battery capacity is low
" blinks.
appears. (This will differ depending on usage.)
lower than approximately 5 °C.
and quantity of the shaving gel. This is not abnormal.
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
finger rest while using the shaver.
After use
The used time and
remaining battery capacity
blink alternately and then
turn off after 8 seconds.
2017/12/22 10:34:33