Celestron TRAVEL SCOPE 60 DX Guía De Instalación Rápida página 5

USING THE
Bluetooth
Remote
1
To insert or replace the battery, place your thumb
in the center of the back cover, pressing inward and
sliding downward remove the battery door. The CR2032
battery should be inserted with the positive (+) side
facing upward. Replace the cover.
4
Open your camera app. Press the button on the
remote to trigger the shutter on your phone.
4 | ENGLISH
2
Press and hold the button on the remote for 5 seconds.
A blue light will turn on and, after a few seconds, start
to blink. The remote is now in pairing mode.
5
If your camera is in video mode, you can press the
button once to start recording and again to stop
the recording.
3
Using the Bluetooth settings on your phone, pair the
device called "GBshutter".