GreenWorks STG302 Manual Del Operador página 3

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Important safety instructions...........4
3 Symbols on the machine................... 5
4 Risk levels...........................................5
5 Service................................................ 6
6 Environmentally safe battery
disposal............................................... 6
7 Proposition 65.................................... 6
8 Installation......................................... 6
8.1 Unpack the machine.......................................... 6
8.2 Attach the guard.................................................7
8.3 Assemble the shaft.............................................7
8.4 Attach the auxiliary handle................................7
8.5 Install the battery pack.......................................7
8.6 Remove the battery pack................................... 7
9 Operation........................................... 8
9.1 Start the machine............................................... 8
9.2 Stop the machine............................................... 8
English
9.3 Adjust the length of the cutting line.................. 8
9.4 Adjust the length of the cutting line
manually............................................................ 8
9.5 Line cut-off blade.............................................. 8
9.6 Adjust the cutting diameter................................8
9.7 Change to the edging mode............................... 9
9.8 Pivoting Head Function .................................... 9
9.9 Operation tips.................................................... 9
9.10 Cutting tips........................................................ 9
10 Maintenance.....................................10
10.1 General information.........................................10
10.2 Clean the machine........................................... 10
10.3 Replace the spool.............................................10
10.4 Replace the cutting line................................... 10
11 Transportation and storage............ 11
11.1 Move the machine............................................11
11.2 Store the machine.............................................11
12 Troubleshooting............................... 11
13 Technical data.................................. 12
14 Limited warranty............................ 12
15 Exploded view..................................13
3
EN