Batavia BT-PR001 Manual De Usuario página 6

English
3.) When not in use rest the Handy Paint Roller on the
kickstand (a).
• When using kickstand, the Handy Paint Roller should
always be on a drop cloth (b) or over newspaper in case
of drips.
• When painting, kickstand should be pointed away from
roller to avoid getting spatter on kickstand.
• To prevent drips, relieve pressure on the Handy Paint
Roller by pulling plunger out slightly.
NOTE: Attaching the spatter guard when using the
kickstand helps insure that any dripping paint is
contained.
1.) Pull plunger back to draw excess paint from roller
frame into tube.
HINT: Place thumb over fill cap cover (a) to help remove
the most paint from the frame prior to pulling back
plunger.
2.) Return paint from the Handy Paint Roller to can by
holding it at a 45 degree angle and pushing fill valve
onto fill tube until it bottoms on fill tube. Push plunger in
until it stops.
3.) Remove the roller by screwing out part (a) and
pulling the roller from the roller frame. It may take some
force.
HINT: Wear disposable gloves or use a plastic bag over
roller to keep your hands clean.
Scrape excess paint into can from roller.
6
I
J
Returning excess paint to paint can
K
L
M
(a)
(a)