Batavia BT-PR001 Manual De Usuario página 7

4.) Screw out part (a) from the roller core and remove
the roller core. (fig. N).
Empty any remaining paint.
Remove the outer cap by inserting the roller frame into
the roller and gently pushing the cap off (fig. O).
1.) Remove the fill tube from the paint can clip and push
it directly into the fill valve. When cleaning water soluble
paints, submerge the fill tube into warm, soapy water
and pull the plunger in and out 5 or more times.
When using oil based paints, instead of water, use
proper cleaning solvent listed on manufacturer's
container and dispose of properly.
HINT: Use a sink, a wash tub, or any container that will
hold water to perform above flushing process. Replace
water when dirty or when moving to the next step.
2.) Remove the fill tube. Then submerge the roller
frame, and ensuring the fill valve is also under water,
pull the plunger in and out 5 or more times (fig. Q).
3.) Remove roller frame and continue cleaning as
needed. Submerge the handle in the warm, soapy water
and pull the plunger in and out 5 or more times.
HINT: Wipe off remaining paint from the end of plunger
(a).
4.) Unthread valve cap and remove wiper seal and duck
bill valve to clean. Rinse all remaining parts and drain all
fluid from the Handy Paint Roller.
5.) Always purchase a perforated roller cover. A
standard roller will not work.
N
Cleaning the Handy Paint Roller
P
Q
R
S
O
English
7