CASO DESIGN SV 400 Manual Del Usuario página 36

Attach the device by screwing it at the cooking vessel.
Fill water into the cooking vessel and observe min-/max-marking at device.
Risk of crushing!
► When screwing the device to the cooking vessel, make sure that your
hands are out of the way of the screw to prevent crushing.
17.2 Control Panel
Display: Current temperature and remaining cooking time are displayed.
temperature and time. If the heating process has not yet started, you can switch
between ° C and ° F by pressing the button for 3 seconds.
Warning
(25 – 90°C) 1 °F steps (77 – 194 °F)
00:01 – 2:00 setting of time in 1 minute steps
2:00 – 99:00 setting of time in 5 minute steps
/time
activation/deactivation of device and starting of
heating process. Press and hold for 3 seconds to switch
to standby mode, the display will switch off.
Plug in the power plug into outlet
after this.
►
water during use, so that always
water is filled into cooking vessel
up to min-marking. Otherwise
the device could be damaged.
►
capacity 6 – 20 L and
RECOMMENDED minimum
height of 16 cm.
►
cooking vessel can bear
temperatures up to 90°C.
setting of temperature in 0,5 °C steps
For activation of device and switching between
Warning
Refill probable evaporated
Use a cooking vessel with
Please ensure that the
36