Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic
icemaker
moving parts of the ejector mechanism, or with
the heating element (located on the bottom of
the icemaker) that releases the cubes. Do not
place fingers or hands on the automatic ice
making mechanism while the refrigerator is
plugged in.
l'élément chauffant (situé dans le bas de la machine
doigts ou les mains sur le mécanisme de production
de glace automatique lorsque le réfrigérateur est
branché dans la prise électrique.
partes en movimiento del mecanismo expulsor o
con el elemento de calefacción (ubicado en la parte
inferior de la máquina de hielos) que expulsa los
cubos. No coloque los dedos ni las manos en el
mecanismo de la máquina de hielos automática
mientras el refrigerador se encuentre enchufado.
A newly-installed refrigerator may take
12–24 hours to begin making ice.
The icemaker will produce seven cubes per
cycle—approximately 15 cycles in a 24-hour
temperature, room temperature, number of
door openings and other use conditions.
14
CAUTION
Avoid contact with the
ATTENTION
PRECAUCIÓN
Evite el contacto con las
Automatic Icemaker
Built-In Refrigerators
Power
Switch
If the refrigerator is operated before the water
connection is made to the icemaker, set the
power switch to OFF.
When the refrigerator has been connected to
the water supply, set the power switch to ON.
Throw away the first full bucket of ice.
Be sure nothing interferes with the sweep of
the feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE: Icemaker works best between 40 and
120 PSI (275-827 kPa) home water pressure.
Icemaker
Feeler Arm
49-60815 Rev. 1
Publicidad
