Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONS
* Ensure the unit's power matches the local power grid.
* Press both sides of the swing to manually adjust the swing leaf to
the desired angle.
WORKING MODES
DEHUMIDIFY MODE
When turned on for the first time, its default mode is the dehumidify mode - this can also
be selected through the mode selection. The default humidity setting is 40% - this will
be shown on the display. The high wind setting will also be activated.
● When the relative humidity (Hr) exceeds the set humidity (Hs) by 3% or more, the
compressor starts and the fan operates at the set wind speed. When Hr is lower than
Hs by 3% or more, the compressor stops and the fan automatically switches to low
wind speed (the wind speed can be adjusted at any time). When Hr is within 3% of Hs,
the dehumidifier remains in its current operating state.
● The set humidity (CO-35-85%RHY) is displayed. You can adjust the setting by
pressing 'UP' and 'DOWN'.
● The fan speed is adjustable.
● Child-lock and timer functions can be set.
● When the ambient humidity is below the set humidity, the red 'OK' indicator light on
the display panel will be off. When the ambient humidity reaches the set humidity, the
red 'OK' light on the display panel will be on.
● When the humidity is set to 'CO', the compressor runs continuously without being
limited by the set humidity (ensuring a three-minute delay protection for the
compressor). The fan speed is adjustable - the display will show 'CO'. Child-lock and
timer functions can be set in this mode.
FAN SPEED
● Enter the air supply mode through the mode conversion (the compressor will not
operate). The default fan speed is low, but it can be adjusted. The display will show
the ambient humidity range of 30-90%RH.
LAUNDRY MODE
● Enter the drying mode through the mode conversion (the dehumidifier runs
continuously without being limited by the set humidity). The default fan speed is high,
which cannot be adjusted. The display will show the ambient humidity.
7
Publicidad
