Descargar Imprimir esta página

Ribimex Ribitech PRASP51LPE Manual De Instrucciones Y Mantenimiento página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

-
If the switch is damaged it must be replaced by a repair workshop.
-
Never use the product if the switch cannot be turned on or off.
-
Warning!
-
The use of accessories other than those recommended in the operating instructions may
lead to a risk of injury to people and animals or damage to property.
-
The product user and/or operator are the only people responsible for any damage to
property or injuries to people.
-
Repairs must only be carried out by a qualified electrician.
-
Damaged parts must be repaired or replaced by a repair workshop unless otherwise stated
in the operating instructions. This product complies with the relative safety regulations.
-
Repairs can only be carried out by a qualified electrician, otherwise the operator could be
injured.
-
For safety reasons, only accessories and additional devices specified in the operating
instructions or recommended by the manufacturer must be used.
Notes:
The safety instructions given in this manual are not able to illustrate fully all the conditions and
situations that may arise. The user and/or operator must use the product sensibly and with care
especially with regard to events that are not specified in this manual.
PRODUCT SAFETY INSTRUCTIONS
-
Become familiar with the controls and the proper use of the product.
-
Use of this product is forbidden by children and adolescents.
-
The equipment can only be used by adults who have been properly trained to do so.
-
This product is not suitable for use by people (including children) with reduced physical,
sensorial or mental capacities, or by those lacking the necessary skill and experience,
unless they are supervised or trained to use the equipment by a person responsible for
their safety.
-
Do not use the product if it is damaged.
-
If the power cord is damaged, it must be replaced by the manufacturer, the customer
service or by a person with appropriate qualifications to avoid any risk of danger.
-
If the power cord or the extension cord shows signs of wear or has been damaged
while the product is in use, remove the plug from the socket immediately.
-
Do not touch the power cord or the extension cord before the plug has been removed
from the socket.
-
Under no circumstances must the following be picked up with the vacuum cleaner:
-
Lit matches or cigarettes, burning embers, inflammable materials, corrosive and explosive
materials in the form of gases or liquids, sharp objects or those with cutting edges.
-
The product is not suitable for vacuuming dust that is dangerous for the health.
-
The product must only be connected to a normal earthed 220 Volt 50/60 Hz socket.
TO START
Unpacking the product
- Remove the product from the packing using the handle provided.
- Check that neither the equipment nor the accessories have been damaged.
- Loosen the fastening hooks.
- Remove the vacuum unit.
- Take out the contents of the bin and position the sponge filter and the bag filter.
- Insert the suction pipe into the hole at the side of the bin and tighten securely.

Publicidad

loading